Universal Wireless Remote Control Switch DC 12V 4CH relay Receiver Module With 4 channel RF Remote 433 Mhz Transmitter With Two Remote Control

SKU: 0096

 2,300.00

In stock

In stock

10 People watching this product now!

Description

Technical Data:

Input Power:AC 220V
 
Standby Current:<8.5MA
 
RF Frequency: 433M
 
RF working mode: superheterodyne
 
Receive sensitivity: > 97 dbm
 
Transmitting distance: More than 15 meters
 
Decoding mode: MCU software decoding
 
Learnable Transmitters: 1-16 transmitters
 
Support remote type: Learning code 1527
 
Switching Modes:
 
Both Momentary & Toggle
 
Wiring type:fixed terminal
 
Switch Output : normally open & normally closed.
 
Dimension of PCB
(L,W,H)
35*30*18mm
1 3/8 * 1 3/16 * 11/16″
 
Switch Output:
 
NO: normal open
 
COM: common
 
NC: normal close
 
 

Wire port :

NO: normal open

COM: common

NC: normal close

 

HOW TO USE:
 
On this products details page, there is a demonstration video available.
 
You can also see the video at this URL:
 
youtu.be/k06q76qthBw
 
Working Modes explanation:
 
Momentary Mode:
 
Push the remote button , the relay activates, release the remote button the relay deactivates.
 
Toggle Mode:
 
Push and release the remote button , the relay activates.
Push and release the remote button again and the relay deactivates.
 
 
 
Clearing All Stored Transmitters:
 
**Note**
 
After clearing the stored transmitters, all transmitters will need to be relearned by the receiver.
 
Push the learning button on the receiver 8 times , and the codes will be cleared .
 
Learning the transmitter :(momentary Mode)
 
Programing a 2 button transmitter as momentary mode transmitter.
 
STEP 1
 
Push and release the learning key on the receiver ONCE.
 
Wait for a moment , the LED will turn off , indicating you entered the learning state.
 
STEP 2
 
Push and release the first button on your transmitter, the LED on the receiver board will flash on then off indicating the button was learned.
 
STEP 3
 
Press and release the second button, watching the LED go on and off again.
 
Wait 3 seconds, the LED will turn on again , indicating system is ready for use.
 
Learning the transmitter : ( Toggle Mode )
 
Programing a 2 button transmitter as toggle.
 
STEP 1
 
Press and release the learning key on the receiver TWICE.
 
Wait for a moment , the LED will turn off , indicating you entered the learning state.
 
STEP 2
 
Press and release the first button on your transmitter, the LED on the receiver board will flash on then turn off.
Indicating the button was learned.
 
STEP 3
 
Next press and release the second button, watching the LED go on and off again.
 
Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use
 
**Notice**
two button transmitters can only be used as toggle or momentary.
One mode per 2 button transmitter.
 
(Please note: You let the control panel to learn the remote control, you must press the “A” and “B” button;
Rather than just pressing one of them )
 
However you can program another transmitter in the other mode.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.