We would like to inform you that our store and delivery services will remain closed from October 20 to October 29 on the occasion of Dipawali (Tihar) and Chhath festivals.
We extend our warmest wishes to you and your family for a joyous Dipawali and a blessed Chhath. May these festivals bring light, prosperity, and happiness into your lives.
We extend our warmest wishes to you and your family for a joyous Dipawali and a blessed Chhath. May these festivals bring light, prosperity, and happiness into your lives.
AT-09 Android IOS BLE 4.0 Bluetooth Module
₨ 850.00
In stock
16
People watching this product now!
Description
Wireless Module AT-09 Bluetooth 4.0 CC2541 IOS BLE description
– Bluetooth 4.0 AT-09 BLE Master / Slave module with 6-pin connection base
– This module is very similar to HM-10 module
– Bluetooth protocol: Bluetooth V4.0 BLE specification
– Ultra-low power consumption, in 90uA standby mode
– This module is very similar to HM-10 module
– Bluetooth protocol: Bluetooth V4.0 BLE specification
– Ultra-low power consumption, in 90uA standby mode
Wireless Module AT-09 Bluetooth 4.0 CC2541 IOS BLE features:
– Chipset based on CC2541
– Bluetooth Class 2
– Industrial level Bluetooth module SPP
– Flash 256Kb
– Integrated chip antenna
– Power supply: + 3.3 VDC 50 mA
– Working temperature: -5 C to + 60 C
– Operating frequency: 2.4 GHz ISM Band
– Modulation method: GFSK (Gaussian Frequency Shift keying)
– 40 channels, 2MHz, 3 fixed transmission channels, 37 automatic frequency adaptation skipping data channels;
– Power adjustment output (-23dBm ~ 6dBm); command AT +
– Transfer rate: asynchronous: 6 kbps synchronous: 6kbps
– Security features: authentication and encryption
– Power consumption: automatic sleep mode, standby current 90uA, 8.5 mA transfer
– PCB size: 37x16mm
– Default baud rate is 9600
– Default PIN is 000000
– AT commands require end of line ( r n)
– Firmware is reported as Firmware V3.0.6, Bluetooth V4.0 LE
– Firmware is from Bolutek
– AT + HELP – list of commands available
– Modules report themselves as BT05
– Status pin is normally LOW and HIGH when device is connected
– Pin EN does not seem to do anything div >
– Bluetooth Class 2
– Industrial level Bluetooth module SPP
– Flash 256Kb
– Integrated chip antenna
– Power supply: + 3.3 VDC 50 mA
– Working temperature: -5 C to + 60 C
– Operating frequency: 2.4 GHz ISM Band
– Modulation method: GFSK (Gaussian Frequency Shift keying)
– 40 channels, 2MHz, 3 fixed transmission channels, 37 automatic frequency adaptation skipping data channels;
– Power adjustment output (-23dBm ~ 6dBm); command AT +
– Transfer rate: asynchronous: 6 kbps synchronous: 6kbps
– Security features: authentication and encryption
– Power consumption: automatic sleep mode, standby current 90uA, 8.5 mA transfer
– PCB size: 37x16mm
– Default baud rate is 9600
– Default PIN is 000000
– AT commands require end of line ( r n)
– Firmware is reported as Firmware V3.0.6, Bluetooth V4.0 LE
– Firmware is from Bolutek
– AT + HELP – list of commands available
– Modules report themselves as BT05
– Status pin is normally LOW and HIGH when device is connected
– Pin EN does not seem to do anything div >
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
User manual for the BLE wireless module AT-09 Bluetooth 4.0 CC2541
– Wiring the AT-09 Bluetooth 4.0 CC2541 IOS BLE wireless module with the UNO module
Application with a DHT22 temperature / humidity sensor
– Wiring the Arduino HC-06 wireless module with a DHT22 / AM2302 temperature sensor div
